产品概述Product description
WQK/QG系列带切割装置潜水排污泵，是本厂吸收西德先进技术及工艺，开发生产的排污机具，它具有排污通过能力特别强，能有效的通过直径为泵口径约60%的固体颗粒。带切割性能好，能将污水中的长纤维、塑料、纸、带、布条、稻草、绳子等杂质切碎后排出。采用的方法，设计成最合理的水力特性，使电泵可以全扬程运行，优良的干式电机和水泵的组合，使电泵的总效率达到西德ABS公司的AS带切割装置系列产品相同，电泵采用高质量的硬质合金，双端面机械密封和骨架油封组合的动密结构。在长时间内工作，本泵电机允许露出液面部位，不得超过电动机高度的1/2，抽送污物温度不超过60℃。
WQK/QG series submerged sewage pump with cutter device, a lates sewage handling solution developed from the advanced technology of West Germany, is provided with especially excellent through capacity. It is able to handle solid particles sized 60% of pump diameter. The sound cutting performance will cut up the long fibre, plastic, paper, strip, cloth pieces, straw and rope etc. in the sewage and then have them discharged out. With most advanced solutions to design the most reasonable hydraulic characteristics, pump can work within full head. The optimized combination of superior dry motor and pump makes the total efficiency of this pump in parallel with the AS with cutter device from West Germany ABS. The pump uses hard alloy of good quality, and the dynamic sealing structure with the combination of double end face mechanical seal and framework oil seal. Under longtime service, the motor of this pump is allowed to come out of liquid level, but not exceeding 1/2 of the height of motor. The temperature of sewage to be handled shall not exceed 60℃.
产品概述Product description
WQX系列污水污物潜水排污泵(以下简称电泵)是我公司技术人员在普通清水潜水电泵的基础上发展起来的新型给排水机具，主要用于排送生活废水、污水、人粪尿及含有短纤维纸屑、木屑、淀粉、泥砂、碎石粒等固件悬浮物和非腐蚀性介质，被抽送液体温度不超过60℃，密度不大于1200kg/m3，PH值5～9。该电泵采用双端面机械密封和旋流式叶轮，叶轮采用不锈钢、耐磨损、不堵塞、不缠绕、具有体积小、结构紧凑、携带方便等优点。
WQX series submerged sewage pump (hereafter called pump for short) is a new solution to water supply and discharge developed by our technicians on the basis of the conventional clean water submerged pump. It is mainly used to handle daily waste water, sewage, urine, wastepaper containing short fibre, wood dust, amylum, mud, sand, stone granules and other solid suspensions and noncorrosive medium. The temperature of liquid to be handled shall not exceed 60℃, density not over 1200kg/m3, PH 5～9. This pump uses double end face mechanical seal and swirling impeller. The impeller is made of stainless steel. This pump takes the advantages of wear resistance, non-clogging, non-winding, small volume, compact structure and easy portability.
